Screw Head Broke Off? How to Remove It Easily
Discovering that the head of a screw has broken off during a repair can feel like a minor disaster, but it is a problem with several well-established solutions. Whether it is a machine screw holding a cabinet hinge or a fastener securing critical equipment, the situation is rarely as hopeless as it first appears.
The key to success lies in staying calm and assessing the specific circumstances before attempting extraction. The method you choose depends entirely on how much of the screw remains exposed and the tools available to you at the moment.
Assessing the Damage
Before reaching for any tool, take a moment to inspect the broken screw visually. The primary factor determining your approach is the height of the remaining shank relative to the surrounding surface.
If the screw head is completely flush or sunk below the material, you will need a different strategy than if a small portion of the shank is still protruding. Understanding this initial condition saves time and prevents further damage to the workpiece.
When a Shank is Present
Should a portion of the screw still be visible, you are in the most favorable scenario. This exposed section provides the necessary grip for a variety of extraction techniques.
For this situation, the most common approach involves using locking pliers, such as Vise-Grips, to clamp down firmly on the exposed shank. Once secured, you can gently wiggle the pliers to loosen the threads while applying steady upward pressure to extract the fastener.
Drilling into the Head
When the screw head is completely sheared off and flush with the surface, drilling becomes a necessary and highly effective method.
The process involves selecting a drill bit slightly smaller than the original screw's inner diameter. Carefully center the bit on the broken stub and drill straight down to create a new internal thread path.
After drilling, you can insert a screw extractor that bites into the newly created hole. By turning the extractor counter-clockwise, you apply leverage to the hardened material, slowly backing the broken fragment out of the hole.
Alternative Solutions and Prevention
If drilling is not an option due to material constraints or lack of bits, other mechanical methods exist. One such method is using a rotary tool with a cutoff wheel to create a groove directly into the side of the remaining screw head.
Placing a snug-fitting nut over this groove allows you to grip the fragment with a wrench and turn it out of the assembly. While this requires precision, it preserves the surrounding material from the heat and stress of drilling.
To prevent future occurrences, consider using penetrating oil on rusty screws and avoiding the use of excessive force. Additionally, employing the correct screwdriver size or socket adapter reduces the likelihood of cam-out, which is the leading cause of stripped heads and snapped fasteners.