The Ultimate Guide to Removing Grasscloth Wallpaper Easily
Removing grasscloth wallpaper can feel like an intimidating project, but with the right approach, it becomes a manageable task. This natural material, while beautiful, is notoriously tricky to handle due to its delicate fibrous surface and the delicate paper backing that often deteriorates over time. The goal of this guide is to provide you with the most effective and least damaging method for stripping away old grasscloth, protecting your walls in the process.
Understanding the Challenges of Grasscloth
Before you begin scraping, it is essential to understand why grasscloth is difficult to remove. Unlike standard vinyl wallpaper, grasscloth is composed of individual fibers like jute, hemp, or grass compressed into a sheet. This composition makes it incredibly fragile and prone to tearing in large sections. Furthermore, many older grasscloth walls were installed using a paste that seeps deep into the fibers, creating a bond that is difficult to break. The backing paper is also prone to crumbling, which can leave a dusty, stubborn residue on the drywall underneath.
Assess Your Wall Condition
To determine your strategy, you must first evaluate the current state of your walls. If the grasscloth is peeling or curling at the edges, this indicates that the adhesive has already begun to fail, which can make the job easier. However, if the wallpaper looks pristine and feels rock-hard, you are in for a more intensive process. Crucially, check for moisture damage; if the drywall behind the grasscloth feels soft or spongy, you will need to address that structural issue before attempting to remove the covering.
Preparation and Safety
Protecting your workspace is just as important as removing the wallpaper itself. Grasscloth removal is a messy job that produces a significant amount of fibrous dust and paper debris. Start by clearing the room of furniture or moving it to the center and covering it with plastic sheeting. Lay down drop cloths on the floor to catch falling debris. Because you will be applying water to the walls, it is wise to wear rubber gloves to prevent your hands from becoming waterlogged and wrinkled, which makes handling the sticky paste uncomfortable.
- Remove furniture or cover with plastic.
- Lay down floor protection.
- Wear gloves and safety glasses to protect from debris.
- Test a small area to determine the wallpaper's composition.
The Steam Method vs. The Soaking Method
There are two primary schools of thought when it comes to removing grasscloth: steaming and soaking. The steam method is generally considered the gold standard because it uses vapor to penetrate the adhesive without saturating the wall material. This heat breaks the bond of the paste while minimizing water damage to the drywall. The soaking method involves applying a water solution to the surface until the paste dissolves, but this carries a higher risk of causing the drywall to swell or the grasscloth fibers to detach in unmanageable sheets.
Step-by-Step Removal Process
For most homeowners, a hybrid approach yields the best results. Begin by scoring the surface of the grasscloth with a wallpaper scoring tool or a standard fork. This creates tiny perforations that allow your chosen solution to penetrate the backing. If using a steamer, hold the device against the wall for 30 to 60 seconds to allow the vapor to break down the adhesive. If using a solution of warm water and fabric softener or a dedicated wallpaper remover, spray the area until the paper is visibly saturated but not dripping.
Scraping and Cleanup
Once the adhesive has been sufficiently weakened, use a 6-inch drywall knife or a wide putty knife to gently slide under the edge of the grasscloth. Work slowly and at a low angle to prevent gouging the drywall beneath. You will likely find that the material pulls away in sections rather than whole sheets; this is normal and expected. Do not force large sections if they resist, as this often results in tearing the paper and leaving chunks of adhesive behind. After the bulk of the grasscloth is removed, use a sponge and warm water to scrub away the remaining paste residue. Finally, inspect the drywall for any damage and sand down any rough spots or loose paper before proceeding with priming and painting.
| Method | Best For | Risk Level |
|---|---|---|
| Steam | Intact grasscloth, thick adhesives | Low water damage risk |
| Soaking | Loose or deteriorating paper | Higher risk of drywall damage |