How to Wax Cross Country Skis with Scales: Step-by-Step Guide
Maintaining your cross country skis with a waxless scale base is a fundamental skill for any winter enthusiast who wants consistent glide and control on the trail. While traditional herringbone or fishscale patterns provide natural grip without aggressive waxing, they still require regular treatment to perform optimally in varied conditions. This process involves cleaning, inspecting, and applying a targeted wax specifically designed to enhance the scales' gripping ability while preserving their structure. Understanding the delicate balance between too little and too much wax is the first step toward mastering this essential maintenance technique.
Understanding the Purpose of Waxing Cross Country Skis with Scales
Unlike classic waxable skis that rely on a layer of glide wax and kick wax for friction, waxless skis depend on their raised pattern, or scales, to provide traction in the snow. However, these scales are not immune to the elements; dirt, old wax residue, and UV radiation can clog the pattern and make the bases brittle. Applying the correct wax serves to condition the plastic, keeping the scales flexible and able to grip the snow crystals effectively. It also fills in microscopic pores to prevent snow from packing into the texture, which would otherwise kill your forward momentum and slow you down significantly.
Gathering the Necessary Tools and Materials
Before you begin, ensure you have gathered all the specialized tools for a efficient and thorough job. You want to work with products that are specifically formulated for modern synthetic ski bases to avoid damage. Having the right equipment on hand will streamline the process and ensure a consistent result the first time.
- Ski-specific base cleaner and a dedicated plastic cleaner
- A stiff plastic ski brush or a stiff-bristle toothbrush
- Wax specifically labeled for "waxless" or "fishscale" skis
- A heat source, such as a dedicated ski iron or a household iron with a steam setting
- Clean microfiber cloths or rags
- Protective gloves and a light mask for ventilation
Step-by-Step Application Process
The application process is methodical and requires patience to avoid overheating the plastic. You are aiming to bond the wax to the base of the scale rather than simply melting it on top. Follow these steps to ensure a durable and high-performance finish.
1. Deep Cleaning the Scales
Start by thoroughly cleaning the ski bases. Use a plastic cleaner to remove any old wax, dirt, or oils accumulated from storage or previous use. Scrub gently but firmly along the direction of the scales to lift out any compacted debris. Rinse the skis with clean water and allow them to dry completely in a warm environment before proceeding to the next step.
2. Applying the Wax Evenly
Once the skis are clean and dry, hold the wax stick against the base and draw a thin, consistent line along the length of the ski. You do not need to apply a massive amount; the goal is to coat the scales lightly and evenly. Focus on the areas where the scales meet the base, ensuring the wax can penetrate the textured edges.
3. Melting the Wax into the Base
Using your iron or ski iron, hold the heat source above the waxed area, allowing the heat to melt the wax without directly pressing the iron onto the fragile scales. Move the iron steadily and consistently, watching for the wax to lose its hazy appearance and bond with the plastic. You should see the wax penetrate the scale pattern, creating a smooth, slightly glossy surface.
4. Buffing and Final Cleanup
After the wax has cooled and solidified, use a stiff plastic brush to scrape off any excess wax protruding from the scale peaks. Brush vigorously along the length of the ski to sharpen the definition of the scales. Finally, buff the entire base with a clean microfiber cloth to remove any remaining residue and prepare the skis for their first glide.
Maintaining Performance Between Rides
Waxing your scales is not a one-time task; it is an ongoing maintenance routine. Inspect your skis before every outing, looking for areas where the wax has worn thin or the scales have lifted. Cold temperatures and aggressive snow can strip the wax quickly, so a quick brush-down with a cleaning agent followed by a touch-up stick application every few trips will keep them performing at peak levels. This regular attention will extend the life of your skis and ensure they respond predictably when you head out.
Troubleshooting Common Issues
Even with careful application, you might encounter issues that affect the ski's glide. If the scales appear white and chalky after waxing, you likely used too much heat or the wrong type of wax, causing surface damage. If you experience zero grip, the wax may be too hard for the current temperature, or the scales may be clogged with old residue that wasn't fully cleaned out initially. In these cases, a complete de-wax and re-cleaning of the base is often the only solution to restore the intended texture and performance.