How to Replace Drum Brakes: A Step-by-Step Guide
Replacing drum brakes is a fundamental maintenance task that every vehicle owner should understand. While disc brakes dominate modern braking systems, drum brakes remain a cost-effective and reliable solution for the rear wheels of many cars and trucks. This system uses brake shoes that press against the inside of a rotating drum to slow the vehicle. Over time, the friction material wears down, and the hardware can become corroded, leading to reduced stopping power and a less safe driving experience. Learning how to replace them correctly ensures your vehicle remains safe and compliant for inspection.
Understanding the Drum Brake Assembly
Before attempting the replacement, it is essential to understand the components you are working with. A drum brake system is self-energizing, meaning the friction of the braking process helps to press the shoes harder against the drum. The primary components include the brake drum, which is attached to the wheel hub and rotates with it, and the brake shoes, which are lined with friction material. The wheel cylinder, mounted at the top of the assembly, uses hydraulic pressure to force the shoes outward. Finally, the backing plate provides the structural mounting surface and houses the parking brake mechanism, which is often adjusted during the replacement process.
Gathering Tools and Preparing the Vehicle
Success in this task relies heavily on having the right tools and taking the proper safety precautions. You will need a standard socket set, wrenches, screwdrivers, and a brake spring tool to compress the components safely. A torque wrench is critical for ensuring components are secured to the manufacturer's specifications. You will also need a sturdy jack and jack stands to lift the vehicle, and a set of brake cleaner for removing old grease and debris. Always wear safety glasses and gloves, as old brake dust and hardware can be hazardous. Never rely solely on a jack to hold the weight of the vehicle; jack stands are mandatory for safety.
Removing the Wheel and Old Hardware
The process begins by loosening the lug nuts on the target wheel while the vehicle is still on the ground. Once loosened, you will lift the vehicle and secure it with jack stands. You can now remove the wheel to expose the brake drum. Often, the drum is held in place by a set screw or a small retaining clip. Locate these fasteners and remove them. If the drum does not slide off easily, you may need to gently tap it with a rubber mallet or use a puller. Avoid striking the drum with excessive force, as this can cause damage. Once the drum is free, you will see the brake shoes and the tension of the return springs.
Disconnecting the Parking Brake and Removing Shoes
This step requires the most mechanical strength and patience. The parking brake cable is attached to one of the brake shoes and must be disconnected before the assembly can be removed. Locate the adjuster and the cable lock, then unhook the cable from the anchor point. To make the removal easier, you should adjust the star wheel adjuster to loosen the shoes as much as possible. Using your brake spring tool, carefully compress the springs holding the shoes in place. While maintaining control of the tool, maneuver the shoes out of the drum. Keep track of the specific hardware and springs, as they are often unique to the left or right side of the vehicle.
Installing New Components and Adjusting the Drum
With the old assembly removed, it is time to install the new parts. If your replacement kit includes new hardware, it is highly recommended to use it. Inspect the wheel cylinder for any signs of leakage and replace the dust boot if necessary. Lubricate the contact points of the backing plate with high-temperature brake grease, but ensure none gets on the friction surfaces. Install the new brake shoes, aligning the positioning clips correctly. Reattach the parking brake cable to the new shoe. Before placing the drum back on the hub, use the tool to expand the new shoes to match the diameter of the drum. This initial adjustment makes the final setup much simpler.
Reassembly and Bed-In Procedure
Reverse the removal process to reassemble the brake. Place the drum over the wheel hub and align it with the axle. Slide the drum into place, ensuring it spins freely without rubbing. Secure the set screw or clip and remount the wheel. Lower the vehicle and torque the lug nuts to the specified setting. You are now ready for the bed-in process, which is vital for the longevity of the new parts. Drive the vehicle at a moderate speed and apply the brakes gently several times to set the shoes. Then, increase your speed slightly and perform a firm stop from 30 to 40 mph. This process seats the friction material correctly and prevents squealing. Test the parking brake thoroughly to ensure the vehicle holds on an incline.