How to Remove Old Wallpaper from Drywall: Easy Step-by-Step Guide
Removing old wallpaper from drywall is often the single most daunting part of any renovation project. While installing new wallpaper can be a quick cosmetic fix, the underlying paper can age, yellow, or deteriorate, leaving a textured mess that clings stubbornly to the wall surface. This comprehensive guide walks you through the most effective methods, from chemical solutions to steam power, ensuring you understand how to remove wallpaper from drywall without damaging the plasterboard underneath.
Assessing Your Wallpaper and Wall Condition
Before you grab a spray bottle and razor blade, take a moment to evaluate what you are dealing with. The age of the wallpaper is a critical factor; paper installed before the 1980s often contains asbestos or was glued with highly durable adhesives that resist modern solvents. Additionally, you must determine whether your drywall is regular or moisture-resistant (green board). Moisture-resistant drywall can handle more water exposure during the removal process, while standard drywall can crumble if oversaturated. Finally, inspect the surface for any signs of mold, water damage, or loose seams that need addressing before you begin.
Identifying Vinyl vs. Non-Vinyl Wallpaper
Not all wallpaper is created equal, and the removal method depends heavily on the material. Vinyl wallpaper has a plastic coating that makes it waterproof but also extremely difficult to remove; it requires a scorer to create holes so that the solution can penetrate the backing. On the other hand, paper-backed or fabric wallpapers are porous and will absorb water or solvent quickly, allowing the paste to break down faster. If you are unsure of the type, perform a simple test by placing a damp cloth on a small, inconspicuous corner; if the water beads up, it is vinyl, but if it absorbs, it is a non-vinyl surface.
Method 1: The Hot Water and Chemical Solution
This is the most common DIY approach and relies on chemistry to break down the adhesive bond between the paper and the drywall. You will need a heavy-duty wallpaper remover solution, a pump sprayer, and a 6-inch drywall saw or scoring tool. The process involves spraying the solution generously onto the surface, allowing it to dwell for 15 to 30 minutes to dissolve the paste, and then gently scraping the softened paper away with a wide putty knife. This method is ideal for non-vinyl papers and works moderately well on vinyl if the solution is allowed to sit for an extended period.
Step-by-Step Chemical Removal
- Protect the floor with drop cloths and remove any outlet and switch plate covers.
- Apply the wallpaper remover solution according to the manufacturer’s instructions, ensuring full coverage.
- Wait the recommended time, usually 15 to 45 minutes, until the paper visibly softens.
- Use a 6-inch drywall saw to create ventilation holes if dealing with vinyl wallpaper.
- Gently slide a wide putty knife under the paper and peel it away in manageable sheets.
- Rinse the drywall with clean water to remove any residual chemical or adhesive.
Method 2: The Steamer Method
If you are dealing with a stubborn, thick vintage wallpaper or trying to preserve the drywall texture for a skim coat, a steamer is the most efficient tool on the market. These devices boil water and produce a continuous stream of high-temperature steam that penetrates the paper and adhesive without soaking the drywall. Unlike water-based solutions, a steamer loosens the bond through heat and moisture simultaneously, reducing the risk of the drywall absorbing too much liquid and turning to mush.
Operating a Wallpaper Steamer
- Fill the steamer reservoir and plug it in, allowing 10 to 15 minutes for it to reach full temperature.
- Hold the steamer head about 1 inch from the wall, moving it slowly across the surface to apply consistent heat.
- Focus on small sections (2x2 feet) at a time to prevent the steam from dissipating.
- Once the paper softens, gently lift a corner with a putty knife and peel vertically downward.
- Use a damp sponge to wipe away any remaining adhesive residue.
Dealing with Mold and Testing the Paper
Safety must be your top priority, especially in older homes. If you encounter green or black spots on the wallpaper, you are likely dealing with mold. In this scenario, you must wear an N95 mask, gloves, and eye protection. Spray the mold with a solution of water and tea tree oil or a commercial mold killer, let it sit, and then carefully scrape it off. Never scrub mold aggressively with a dry brush, as this releases spores into the air. Furthermore, perform the "sponge test" by applying a small amount of water to the wall; if the sponge turns the water dark brown or black, the underlying drywall may be contaminated and require professional handling.
Cleanup and Preparing for Drywall Repair
Once the paper is off, the real work begins. You will likely be left with a rough surface where the adhesive was applied, often referred to as "orange peel" texture. To ensure a smooth finish for your new paint or mud, you must de-gloss the surface. Use a pole sander with 120-grit sandpaper to lightly smooth the walls, focusing on removing the shiny residue of the old adhesive. Be cautious not to sand too deeply, as this can compromise the drywall paper. After sanding, vacuum the dust thoroughly and apply a stain-blocking primer before painting to prevent any ghost lines or tannins from bleeding through the new finish.