How to Put Dried Flowers in Resin: The Ultimate Guide
Preserving the delicate beauty of pressed flowers within solid, clear resin is a popular craft technique for creating stunning jewelry, home decor, and artistic displays. The process requires careful preparation and the right materials to ensure the flowers remain crisp and vibrant, rather than turning brown or disintegrating over time. Success depends on selecting perfectly dry botanicals and using a high-quality, optically clear resin formula.
Preparing Your Dried Botanical Materials
The foundation of a successful piece is the quality of the dried flowers. Fresh flowers contain moisture and sap, which generate gas bubbles and cause the resin to cloud as they decompose. You must use botanicals that are 100% dry and flat.
Selection and Drying Methods
Not all flowers dry equally, and some varieties are better suited for resin work than others. Flowers like baby’s breath, statice, lavender, and cornflowers dry naturally and retain their color well. You can dry flowers by hanging them upside down in a dark, dry, and well-ventilated space, or use a desiccant method with silica gel or borax to preserve delicate petals.
- Ensure the flowers are completely flat before placing them in the mold.
- Trim any excess stem material that could create air pockets.
- Handle the dried petals with tweezers or gloves to prevent oils from your skin transferring onto the surface.
Avoid using flowers with high moisture content, such as roses or carnations, unless they have been thoroughly dehydrated, as they will ruin the curing process.
Choosing the Right Resin and Tools
Not all resin is suitable for encapsulating organic materials. You need a slow-curing, water-clear casting resin specifically designed for thick layers and bubble reduction. Epoxy resin is the most common choice due to its clarity and ease of mixing.
| Essential Tool | Purpose |
| Mixing Cups | For combining the resin and hardener accurately. |
| Stir Sticks | To ensure a thorough blend without introducing bubbles. |
| Silicone Mold | Provides a non-stick surface for easy demolding. |
| Butane Torch | Used to pop surface bubbles created during mixing. |
Work in a dust-free environment, as dried flowers are static-prone and will attract dust particles if left uncovered before pouring.
Creating the Base Layer
Resin cures from the bottom up, so you must create a clear base layer before introducing the flowers. Mix the resin and hardener according to the manufacturer’s instructions, ensuring you scrape the sides and bottom of the cup thoroughly to avoid unmixed spots.
Pour a thin layer of resin into the bottom of your mold, approximately 1/8 to 1/4 inch deep. This layer acts as an anchor for the botanicals. Use your stir stick to gently guide the flower heads into the center of the mold, positioning them exactly where you want them to sit in the final piece. Allow this layer to cure until it is slightly tacky but not fully hardened.
Positioning the Dried Flowers
This is the critical artistic step. Because the resin is tacky, the flowers will adhere to the sticky base, preventing them from floating to the surface in the next layer. Arrange the dried petals carefully, remembering that they will slightly shift when the next layer is poured.
- Place the flowers face down if you want the detailing visible from the top.
- Place them face up if you want the silhouette to be the main feature.
- Avoid overcrowding the design; give the resin room to flow around the stems.
The goal is to suspend the botanicals in the center of the piece, avoiding contact with the mold’s bottom if possible to create a 3D effect.
Pouring the Seal Coat
After the flowers are positioned, you need to seal them in place to prevent bubbles from forming beneath the petals during the final pour. Mix a fresh batch of resin and gently pour it over the flowers until they are just submerged.
Use your torch to quickly pass over the surface to eliminate the bubbles that rise to the top. Cover the mold with a cardboard box or a dust cover to protect the sticky resin from airborne particles. Allow this seal coat to cure for the time specified by the resin brand, usually until it is hard but not sticky.
Executing the Final Pour
Once the seal coat is cured, you can mix the final batch of resin for the full encapsulation. This pour needs to be done in a single, smooth session to ensure a glass-like finish without layering lines.
Slowly pour the resin into the mold, starting from the center and moving outward to push out any air trapped around the flower stems. Continuously monitor the pour for bubbles and zap them with the torch every few minutes. Fill the mold until the resin forms a slight dome, which will cure flat once hardened. Cover again to prevent dust contamination and let it cure undisturbed for 24 to 72 hours.
Demolding and Finishing
When the resin has reached its full hardness, it is time to remove the piece from the mold. If using a silicone mold, gently flex the sides to release the edges. If the piece is stubborn, placing it in the freezer for 10 minutes can cause the resin to contract slightly, making it easier to pop out.
After removal, inspect the surface. If the mold was quality, the piece should be ready to use. If necessary, you can lightly sand any edges or imperfections and polish the surface to regain the high-gloss finish.