How to Measure a Pool Table for Felt: Size & Fit Guide
Measuring a pool table for felt is the essential first step in any professional re-felting project. An accurate measurement guarantees that you order the correct amount of material, avoiding the frustration of wasted fabric or the last-minute scramble to purchase more. This process requires precision and a systematic approach, moving beyond simple length and width calculations to account for the table's unique geometry.
Before taking a single measurement, preparation is critical. You must clear the playing surface of any loose debris, chalk dust, or old staples that could distort your readings. A clean, unobstructed table allows for accurate tape placement and ensures the measuring tape lies flat against the rail. Furthermore, using a reliable metal measuring tape is non-negotiable; a cloth or flexible tape can bend and produce incorrect dimensions that compromise the entire project.
Understanding Pool Table Geometry
The geometry of a pool table is more complex than a simple rectangle. The playing surface is rectangular, but the rails add a significant overhang, and the corners are distinct points that require special attention. When measuring for felt, you are not just measuring the top of the slate; you are measuring the entire structure that the fabric will wrap around. This includes the vertical face of the rails and the precise location where the corners meet.
Measuring the Playing Surface
The playing surface dimensions are the foundation of your measurements. You need to determine the exact length and width of the table bed, which is the area between the inner edges of the rails. Measure from the inner edge of one cushion directly across to the inner edge of the opposite cushion. Record both the length and the width, ensuring you measure both directions to check for any inconsistencies in the table's structure.
Accounting for the Rails
The rails are the most critical element to measure correctly, as they determine the overlap required for a secure and wrinkle-free installation. You must measure the height of the rail face (the vertical portion) from the top of the slate to the top of the rail cushion. Simultaneously, measure the thickness of the rail face, which is the depth of the wood extending from the slate to the outer edge. These two measurements dictate how much felt you will need to wrap the rail securely.
| Measurement Type | Description | Why It Matters |
|---|---|---|
| Playing Surface | Length and width between inner cushion edges | Determines the main panel size |
| Rail Face Height | Vertical distance from slate to rail cushion top | Calculates vertical fabric overlap |
| Rail Face Thickness | Depth of the rail from slate to outer edge | Calculates horizontal fabric overlap |
Measuring the Corners
Ignoring the corners is the most common mistake in pool table measuring. The corners are not simple right angles; they are mitered folds that require extra material to lay flat. To measure a corner, you must determine the "fold depth"—the distance from the point where the two rail faces meet (the external corner) to the point where the fabric will be stapled down on each rail. This is typically measured about 2 to 3 inches out from the point along each rail face.
To visualize this, imagine pushing the fabric into the corner crease to form a perfect 45-degree angle. The length of fabric needed for that miter is the square root of two times the fold depth. While you can use a mathematical formula, it is often safer to add a consistent 4 to 6 inches of excess material per corner to ensure you have enough for a clean, professional miter fold without running short.