How to Make a Matted Picture Frame Like a Pro
Creating a matted picture frame is a rewarding project that transforms a simple photograph or artwork into a professional display piece. The mat, or mount, provides a visual buffer between the image and the glass, preventing it from sticking and creating a polished, gallery-like appearance. With the right tools and a careful hand, you can achieve a crisp, clean finish that elevates any piece of art.
The Essential Tools and Materials
Before you begin, gathering the precise tools is the first step toward a flawless result. You cannot rely on improvised tools for the cutting and fitting required for a professional mat. Investing in the right equipment ensures accuracy and saves you from the frustration of re-doing your work.
- Mat board cutter or a utility knife with a snap-off blade.
- Self-healing cutting mat to protect your work surface.
- Metal ruler with a non-slip backing or a T-square.
- Pencil and eraser for marking measurements.
- Hinging tape for archival mounting.
- The frame itself, glass or acrylic, and the artwork.
Taking Accurate Measurements
The foundation of a good mat is the measurement. A precise fit ensures the artwork is centered and creates the desired aesthetic gap between the image and the frame edge. Rushing this step is the most common cause of error, leading to a crooked image or a mat that is too tight or too loose.
Start by measuring the exact dimensions of your artwork. Next, measure the inside dimensions of the frame's opening. The mat opening should be slightly smaller than the artwork to hold it in place, while the mat's outside dimensions should fit comfortably within the frame's rabbet—the inner lip where the glass sits.
Calculating the Mat Width
Determining the width of the mat border is a matter of personal taste, but there is a standard approach that looks balanced. Generally, the mat width should be at least twice as wide at the bottom as it is at the top. This visual weight creates a sense of stability, as the mat "sits" below the center of the image.
| Standard Visual Weight | Recommended Width |
|---|---|
| Top Border | 1/8 inch to 1/4 inch |
| Bottom Border | 1/4 inch to 1/2 inch |
Marking the Mat Board
With your measurements calculated, you move to the marking phase. This step requires a steady hand and a sharp pencil to ensure your lines are fine and precise. You will be measuring from the edge of the mat board inward to create the window for the artwork.
Place the mat board flat on your cutting mat. Using your ruler and pencil, mark the exact measurements for the opening from each edge. Double-check these measurements against your artwork to confirm accuracy. Connect the dots to form a rectangle, and verify that it is perfectly square before proceeding.
The Cutting Process
This is the most critical step where patience is key. Cutting the mat cleanly requires multiple light passes rather than trying to cut through the board in a single stroke. Pressing too hard risks cracking the mat or bending the ruler, which ruins the straightness of the line.
- Align your ruler firmly along the pencil line, ensuring it overhangs the mark slightly to protect the mat from stray cuts.
- Hold the knife at a consistent 45-degree angle to ensure a beveled edge that sits flush against the glass.
- Make 3 to 5 shallow passes, gradually slicing through the mat board.
- Score the back side of the board to complete the cut cleanly and prevent ragged edges.
Finishing and Assembly
Once the mat is cut, inspect the edges for any imperfections. If necessary, gently smooth the beveled edge with fine-grit sandpaper to remove any paper fuzz. The final step involves assembling the frame in a specific order to protect the artwork without trapping moisture.
Begin by placing the glass against the back of the frame. Next, insert the matted artwork, ensuring the beveled edge faces the glass to create a shadow gap. Use hinge tape to attach the artwork to the mat board, allowing both the mat and the art to expand and contract naturally with humidity changes.
Archival Considerations
If you are preserving valuable or irreplaceable items, the materials you choose matter. Standard adhesives and non-archival boards can yellow or degrade over time, damaging your cherished memories. Using acid-free and lignin-free materials ensures the longevity of your project.
Instead of glue, opt for photo corners or linen hinge tape. These methods hold the artwork securely while allowing you to remove it later without causing damage. This approach is essential for maintaining the value and integrity of the piece you are framing.