2020 Ram 1500 Running Boards Installation Guide: Step-by-Step DIY
Installing a set of running boards on your 2020 Ram 1500 is one of the most practical and visually impactful modifications you can make. Whether you use your truck for hauling equipment, navigating rough terrain, or simply want to make entry and exit easier for passengers, these side steps provide a sturdy foothold that protects your doors from scrapes. This guide walks you through the entire process, covering the different styles available, the tools required, and a step-by-step installation that you can complete in your own garage.
Choosing the Right Running Boards for Your 2020 Ram 1500
Before you begin the installation, selecting the correct set of running boards is crucial for a clean fit and long-term durability. The 2020 Ram 1500 has specific mounting points, and not every pair of boards designed for full-size trucks will align properly. Your first decision is the material: aluminum, stainless steel, or rubberized polyurethane. Aluminum offers a lightweight option that resists rust, while stainless steel provides a heavier, more premium look that can handle severe weather. Rubberized options are often the most forgiving during installation, as they typically use larger brackets that distribute stress evenly.
Next, consider the style of the board. Some running boards feature a narrow, low-profile design that sits close to the wheel arch, while others are thicker and boxier, offering a more aggressive stance. You should also verify whether the boards come with integrated lighting, such as LED strips or clear cover lenses, which can add functionality for night-time use. Finally, double-check the specific year and trim, as models with larger wheel wells or different door heights may require a custom-fit kit rather than a one-size-fits-all solution.
Tools and Preparation Required
Gathering the right tools beforehand ensures a smooth installation and prevents the frustration of stopping mid-project. You will need a set of metric sockets and wrenches, a torque wrench, and a good set of screwdrivers. Depending on your truck's configuration, you might also need a u-puller or pry tool to remove the factory molding without damaging the clips. A drill with various bits is usually not required, as most high-quality running boards use brackets that tap into existing threaded holes.
Here is a quick overview of the essential items you should have on hand:
- Metric socket set and ratchet
- Torque wrench
- Screwdrivers (flathead and Phillips)
- Trim removal tool or plastic pry bar
- Allen keys or hex bits
- Masking tape (for protecting paint)
- Work gloves and safety glasses
Step-by-Step Installation Process
With the right hardware selected and tools prepared, you can begin the installation. It is generally recommended to lift the front of the truck slightly on ramps or a jack to provide more clearance, though many installations can be done safely with the vehicle on the ground. The process involves aligning the brackets with the pre-drilled holes on the chassis, securing them with bolts, and then snapping the running board into place. Taking your time to align the boards correctly before tightening the bolts will result in a straight, professional-looking finish.
Removing the Factory Molding
Most 2020 Ram 1500 models come with plastic door sill moldings that cover the gap between the door and the rocker panel. You must remove these to access the mounting holes for the running board brackets. Use a trim removal tool to gently pry the molding outward, working slowly around the clips. Avoid using metal tools that could scratch the door sills, and be mindful of any wiring harnesses if the molding is attached to the window regulator switches.
Attaching the Brackets
Once the moldings are off, you will see the threaded holes or bolt slots on the vehicle's chassis. Align the running board bracket with these holes, ensuring that the board will sit level and centered on the wheel arch. It is a good practice to loosely hand-tighten all the bolts before applying full torque, as this allows you to adjust the position slightly if the alignment is off. When you are satisfied with the fit, tighten the hardware to the manufacturer's recommended torque specification to prevent vibration loosening over time.
Final Checks and Maintenance Tips
After both running boards are securely attached, give them a firm shake to confirm that the brackets are tight. Test the fit by stepping onto the board with your full weight to ensure it feels stable and does not flex excessively. Inspect the alignment from the side to verify that the boards are parallel to the ground and do not interfere with the tires during full steering lock. Once you confirm the installation is solid, it is wise to recheck the bolts after the first 50 miles of driving, as the aluminum components may settle slightly.
Maintaining your running boards is straightforward but important for longevity. Regularly rinse them off with water to remove road salt and grime, especially during winter months, to prevent corrosion. If you opted for a polished aluminum finish, use a non-abrasive metal polish periodically to keep the shine. For rubberized steps, a simple soap and water solution will keep the surface grippy, ensuring that the boards remain safe to use in wet conditions.