How to Get Rid of Bats Behind Shutters: Safe Removal Guide
Discovering bats behind shutters is a scenario that can startle any homeowner. These nocturnal visitors often choose the narrow gap between the shutter and the wall as a sheltered resting spot, particularly during the daylight hours. While generally beneficial for insect control, bats inside this confined space require a careful and humane approach to removal. This guide provides a clear, step-by-step method to safely evict these uninvited guests without harm.
Assessing the Situation and Understanding Bat Behavior
Before taking action, it is essential to observe and confirm the presence of bats. You might hear soft scratching or squeaking sounds emanating from behind the shutter during the early morning or late evening. Bats are protected species in many regions due to their ecological role, so the primary goal is exclusion rather than elimination. Understanding that they are likely a maternity colony is critical, as excluding them during birthing season can lead to orphaned pups, which is both inhumane and often illegal without a permit.
Why Shutters Attract Bats
Shutters create a dark, secluded gap that mimics the crevices and cavities bats seek in tree bark or rock formations for roosting. The tight space offers protection from predators and the elements, making it an ideal temporary shelter. This preference for narrow, elevated spaces is the key to devising an effective removal strategy that encourages them to leave naturally.
Preparing for Safe Exclusion
To begin the process, you must prioritize safety and caution. Bats can carry diseases like rabies, so it is wise to wear thick gloves and long sleeves to prevent accidental contact. You will need simple materials that create a one-way exit: sturdy wire mesh, duct tape, and a flashlight. The plan is to allow the bats to exit for their nightly feeding but physically block their return to the specific spot behind the shutter.
Inspecting for Entry Points
Run your fingers along the edge where the shutter meets the wall to locate the exact gap. Bats can squeeze through holes as small as a quarter, so the exclusion device must seal every potential exit. Take note of any cracks or holes larger than a dime, as these are the primary access points you will need to address after the main colony has left.
Implementing the One-Way Exclusion Device
The most effective and humane method involves installing a one-way exit device. Cut a section of half-inch wire mesh slightly larger than the gap. Bend the mesh into a funnel shape or create a flap that allows bats to crawl out but prevents them from crawling back in. Position this device over the primary opening, securing it tightly with duct tape or screws so that no alternative gaps remain.
| Material | Purpose | Note |
|---|---|---|
Monitoring and Final Sealing
After the device is installed, exercise patience and monitor the area at dusk. You should observe bats crawling out to forage but being unable to return. This process might take several nights, as every individual in the colony must vacate. Once you are certain no bats are exiting—typically after a week—you can permanently seal the original entry points with heavy-duty caulk or hardware cloth to prevent future infestations.
Legal Considerations and Professional Assistance
It is vital to research local wildlife regulations before proceeding, as disturbing a bat colony can result in significant fines. If the situation involves a large colony, the presence of pups, or if you are uncomfortable handling the exclusion yourself, contacting a wildlife control professional is the responsible course of action. These experts use specialized techniques to ensure the colony is removed legally and ethically, protecting both your home and the bat population.