The Ultimate Guide to How to Frame Prints: Expert Tips & Stunning Results
Framing a print is a meticulous process that transforms a simple piece of paper into a protected work of art. It involves selecting the right materials, precise measurements, and careful assembly to ensure the longevity and visual impact of your artwork. Done correctly, a frame enhances the colors, defines the composition, and provides a professional finish that elevates the entire piece.
Before you begin, it is essential to understand that not all frames are created equal. The interaction between the mat, the mount, and the print itself creates a visual hierarchy. A well-chosen frame acts as a window, drawing the eye directly to the image without overwhelming it. This guide will walk you through the technical and aesthetic considerations required to frame your prints like a professional, ensuring your work is presented in the best possible light for years to come.
Understanding the Anatomy of a Frame
To successfully frame a print, you must first familiarize yourself with the components involved. Each element plays a specific role in the structural integrity and visual appeal of the final product. Skipping any of these steps risks damaging your artwork or resulting in an unprofessional appearance.
- The Frame: The outer border, typically made of wood, metal, or plastic, that houses the artwork.
- The Mount: A rigid board, often white or off-white, that sits inside the frame and provides a clean border around the print.
- The Mat (or Matting):strong> The decorative border, usually cut from cardboard, that sits on top of the mount, creating visual separation between the artwork and the glass.
- The Backing: The rigid material placed behind the mount to support the entire assembly and protect the print from dust and moisture.
- The Hardware: Clips or points that secure the print to the backing, and a hook or wire for hanging.
Measuring and Preparing Your Materials
Precision is non-negotiable in framing. A mistake in measurement is irreversible and can ruin a valuable print. Always measure the artwork, rather than relying on the frame size listed on the package. You need three distinct measurements: the art, the mount, and the frame opening.
Begin by measuring the height and width of your print. The mount should be cut slightly larger than the print itself, creating a margin that varies depending on personal preference—usually between 1/4 inch to 1 inch. The frame's "rabbet" (the inner lip where the back sits) must be large enough to accommodate the thickness of the mount, print, glass, and backing. If the art is smaller than the opening in the frame, light will spill through the edges, distracting from the image.
Step-by-Step Assembly Process
With measurements confirmed, you can begin the assembly. Work on a clean, flat surface to avoid scratches or dust contamination. Lay the glass pane flat, ensuring it is clean on both sides before proceeding.
- Place the glass into the frame, ensuring it lies completely flat.
- Add the mount, aligning the window (the cut-out area) precisely over the artwork.
- Insert the backing board, securing it with the appropriate clips or frame points.
- Double-check that the print is centered and that no air bubbles are trapped underneath the mount.
Protecting Your Artwork
One of the primary reasons to frame a print is protection. However, improper materials can cause deterioration over time. Acid-free materials are a must. Standard cardboard and paper contain acids that can yellow, discolor, or embrittle your print within a few years. Always ensure your mount, mat board, and backing are marked "acid-free" or "archival quality."
Additionally, consider the type of glass you use. Standard glass works for decorative items, but for valuable prints or pieces exposed to direct sunlight, UV-filtering or non-glare glass is recommended. This prevents fading and reduces distracting reflections, allowing the viewer to focus solely on the color and detail of the print.
Hanging and Long-Term Care
Once the print is secured, you must prepare it for hanging. Locate the "key" (the metal tab) on the back of the frame and slide it to the top of the frame. Ensure it is secure before lifting the frame. When hanging, use two hooks on the wall rather than one nail to prevent the frame from tilting. Measure the center point of the frame and the distance between the hooks to match the two wire anchors on the back.
For long-term care, avoid hanging the frame in areas with high humidity, such as bathrooms or kitchens, as moisture can warp the backing or cause mold. Dust the glass regularly with a microfiber cloth, and never spray cleaning solution directly onto the glass, as it may leak into the frame and ruin the print. With proper care, a well-framed print can remain vibrant and protected for decades.