How to Frame a Poster DIY: Easy Step-by-Step Guide
Framing a poster yourself is one of the most rewarding ways to display your art, memories, or favorite prints without paying premium prices. A well-framed piece looks polished and intentional, instantly elevating the mood of a room. This guide breaks down the entire process, from choosing the right materials to securing the final nail, so you can achieve a professional-looking result at home.
Before you cut a single mat or lift a hammer, preparation is key. The difference between a project that frustrations and one that flows lies in organizing your workspace and verifying your measurements. Taking the time to gather the right tools ensures you won’t hit a dead end halfway through, allowing you to focus on the creative satisfaction of the build.
Essential Tools and Materials You Will Need
To execute a clean DIY frame, you won't need a workshop, but you will need specific items to do the job right. Investing in basic tools pays off in accuracy and ease, especially if you plan to frame more than one piece. Here is what you should have on your desk or workbench before starting.
| Tool | Purpose |
|---|---|
| Measuring Tape or Ruler | Exact measurements of the poster and frame rabbet |
| Razor Blade or Box Cutter | Trimming the poster and cutting mat board |
| Cutting Mat | Protects your surface and keeps cuts straight |
| Archival Tape | Holds the poster in place without damaging it |
| Framing Points or Clips | Secures the artwork behind the backing |
Step One: Sizing and Measuring
The foundation of a good frame is the relationship between the artwork and the frame itself. You want the poster to sit flush against the mat or glass, and you need to know exactly where to place those elements. Start by measuring the height and width of your poster down to the millimeter or 1/16th of an inch.
Next, measure the inside dimensions of the frame’s border, known as the rabbet. This is the space between the front glass and the back where your artwork sits. If you are using a mat board, you will cut a window slightly larger than your poster to create a border of white space. A common aesthetic rule is to leave a 2-inch border on all sides, but you can adjust this based on your personal preference or the size of the frame.
Step Two: Cutting the Mat and Poster
If your design includes a mat board, cutting it accurately is the next critical step. Place the mat board face down on your cutting mat, and use a ruler to draw your cut lines. A straight edge is vital here; running a utility knife along the edge of a metal ruler ensures a clean, square corner rather than a jagged tear.
Once the mat is cut, you can prepare the poster. Lay it face down on a clean surface and align it with the mat window you just created. Use small pieces of archival tape to gently secure the edges of the poster to the back of the mat. Avoid overlapping the tape over the image side, as this can cause shadows or damage the print. The goal is to hold it firmly so it doesn’t shift when you insert the board into the frame.
Step Three: Assembly and Securing
With the mat and poster prepared, you can begin the assembly. Lay the frame face down on a soft surface to protect the glass. Start by inserting the glass clean side down, followed by the mat board with the poster taped to it. It is crucial to handle the glass by the edges to avoid leaving fingerprints or causing cuts.
Once the stack is inside the frame, you need to hold it in place. Frame points are small metal prongs that bend inward. Slide them into the grooves of the frame and gently tap them down with a hammer until they are tight against the backing board. This creates a secure sandwich that keeps everything flat and prevents the poster from rattling around when the frame is hung.
Finishing Touches and Hanging
The final steps are what turn a constructed frame into a finished display piece. Before you bend the last point, double-check that the artwork is centered. Look at the frame from the front, and adjust the mat or poster slightly if one border looks wider than the others. Once you are satisfied, bend the points over the cardboard backing to lock the contents in place.
If your frame kit did not include a hook, you will need to attach one to the back. Measure halfway down the vertical side and affix the hook and corresponding wire. When you hang the frame, pull the wire taut to ensure it sits level. With the weight of the frame distributed evenly, your DIY creation will now hang securely, showcasing your effort and taste for years to come.