How to Clean Sheepskin: The Ultimate Step-by-Step Guide
Sheepskin is a remarkable material, prized for its softness, warmth, and natural breathability. Whether it is a pair of boots, a jacket, or a rug, this leather requires specific care to maintain its texture and longevity. Regular maintenance prevents the buildup of oils and dirt, which can eventually lead to deterioration and an unpleasant odour. Understanding the proper steps for cleaning allows you to preserve the material’s natural oils while restoring its fresh appearance.
Before diving into the washing process, it is essential to prepare the sheepskin thoroughly. Jumping straight into water can set stains or cause the fibres to mat. The goal of preparation is to remove loose debris and open the pores of the leather to allow the cleaning agents to work effectively. This step ensures that the subsequent washing process is smooth and prevents scratching the delicate surface during the cleaning phase.
Preparing the Sheepskin for Cleaning
Brushing and Dry Cleaning
Begin by taking the sheepskin outdoors or over a trash can to shake off any loose dirt. Use a soft-bristled brush, a slicker brush, or even a clean toothbrush to gently brush the fur in the direction of the grain. This agitates and removes dust, sand, and dead skin cells that have become trapped. For items like rugs, hanging the skin over a railing and brushing both sides is an efficient way to dislodge ground-in particles without wetting the leather.
Addressing Stains Pre-Wash
Before applying water, inspect the sheepskin for specific stains, such as oil, mud, or salt marks. Treat these areas with a specialized sheepskin cleaner or a mild solution. Applying treatment to dry skin allows the active agents to break down the stain without forcing moisture deep into the hide where it might not evaporate correctly. This targeted approach saves time and prevents the stain from setting permanently during the rinse cycle.
The Washing Process
Hand Washing in Tubs
For most sheepskin products, hand washing is the safest method. Fill a large tub or bathtub with lukewarm water. Add a small amount of pH-balanced sheepskin soap or a gentle, castile-based liquid soap. Submerge the item and gently swirl it through the water, massaging the leather with your fingertips. Avoid vigorous scrubbing or wringing, as this can stretch the skin or cause the wool to mat irreversibly.
Machine Washing (When Appropriate)
Some modern sheepskin rugs or specific boots are designed to withstand machine washing. If the care label permits, use a front-loading washer to avoid the agitation of a top-loader. Place the item inside a mesh laundry bag or pillowcase to protect the fibres. Select a gentle, cold water cycle with a minimal amount of wool-specific detergent. Never use a standard washing machine cycle with hot water or heavy-duty settings, as this will likely destroy the integrity of the skin.
Rinsing and Water Extraction
Eliminating All Soap Residue
This is arguably the most critical step in the cleaning process. Leftover soap acts like a sponge, pulling dirt back into the material and causing it to become stiff as it dries. Whether you are washing by hand or machine, you must rinse thoroughly. Change the water frequently and soak the sheepskin until the bubbles disappear. The water should run clear to ensure that every trace of the cleaning agent has been removed.
Removing Excess Moisture
After rinsing, you need to get as much water out of the leather as possible without twisting it. For rugs, lay the skin flat on a clean towel, roll the towel and skin together like a jelly roll, and press down firmly to absorb the water. For boots or smaller items, gently press the sides of the leather to expel water. Keep in mind that the sheepskin will take on a darker colour when wet; this is normal and the colour will lighten as it dries.
Drying and Conditioning
The Drying Phase
Air drying is the only acceptable method for curing sheepskin. Lay the item flat on a dry towel in a well-ventilated area with indirect airflow. Direct sunlight or artificial heat sources—such as radiators, blow dryers, or space heaters—are the enemies of sheepskin. Heat will harden the leather, cause shrinking, or make the hairs brittle and fall out. Occasionally fluff the wool or nap with your fingers while drying to help it retain its loft and softness.
Restoring the Nap and Condition
Once the sheepskin is completely dry, the final step is to restore its texture. Use a slicker brush or a wire sheepskin comb to gently lift the hairs and restore the nap. Brush the fur in the opposite direction of the grain and then smooth it back down to align the fibres. At this stage, you can apply a leather conditioner or a specialised sheepskin wash to replenish the natural oils that were removed during cleaning. This helps keep the leather supple and prevents cracking over time.