How to Adjust a Toilet: Easy Step-by-Step Guide
Adjusting a toilet that does not sit level or is wobbly is a common household issue that many homeowners face at some point. A crooked toilet can lead to an uneven wax seal, which may cause leaks and water damage around the base. Fortunately, the process to adjust a toilet is straightforward and can often be completed in under an hour with basic tools.
Tools and Materials Required
Before beginning the adjustment, gathering the right tools is essential to ensure a smooth and efficient process. You will need a wrench, a level, shims (if necessary), a putty knife, and a caulk gun. It is also helpful to have a bucket and rags on hand to manage any residual water or mess.
Step 1: Turn Off the Water Supply
Start by locating the water supply valve behind the toilet and turning it clockwise to shut off the water. Flush the toilet once to empty the tank and bowl. Use a sponge or towel to absorb any remaining water in the bowl and tank to keep the work area dry and safe during the adjustment.
Removing the Toilet for Inspection
Carefully unscrew the nuts securing the toilet to the floor using a wrench. Lift the toilet straight up, being cautious of any remaining water, and place it on a towel or tarp. Inspect the wax seal and the flange to ensure they are in good condition and not damaged.
Checking the Floor and Flange
Examine the floor beneath the toilet for any signs of rot, unevenness, or damage. The flange should be securely attached to the floor and sit level with the finished surface. If the flange is uneven or raised, it may need to be repaired or replaced before reinstalling the toilet.
Adjusting the Position
With the toilet removed, you can now assess the alignment. If the floor is uneven, use plastic shims to level the base before placing the toilet back down. Ensure the toilet is positioned correctly on the wax seal and gently press down to create a secure fit.
Reinstalling and Securing the Toilet
Carefully lower the toilet back onto the flange, aligning the bolts with the holes. Press firmly to ensure a proper seal. Hand-tighten the nuts, then use a wrench to secure them slightly, being careful not to overtighten as this can crack the porcelain.
Final Checks and Caulking
Once the toilet is reinstalled, use a level to confirm it sits evenly. Tighten the nuts if necessary and turn the water supply back on. After confirming there are no leaks, apply a fresh bead of caulk around the base to seal the toilet and create a clean, finished look.
Following these steps will help ensure your toilet is stable, leak-free, and properly aligned. Taking the time to adjust and secure the fixture correctly can prevent future maintenance issues and extend its lifespan.