Solved! Fix Your Filled In Pool Problems Fast & Easy
For property owners and facility managers, a filled in pool represents the end of a long maintenance journey. However, the conclusion of the water removal process is just the beginning of a new set of challenges. When a pool is drained, the structure is suddenly exposed to forces it was designed to contain, not forces it must resist from the outside. This situation creates a phenomenon commonly known as a filled in pool problem, where the empty vessel becomes vulnerable to structural failure due to groundwater pressure.
Understanding Hydrostatic Pressure
The primary culprit behind most filled in pool problems is hydrostatic pressure. This is the force exerted by the surrounding soil because of the presence of groundwater. When a pool is full, the water inside balances the pressure exerted by the water in the soil. Once the pool is empty, this equilibrium is shattered. The soil, which is naturally saturated, pushes inward and upward against the pool walls and floor with significant force. This pressure can cause cracks, wall bowing, or even complete collapse if the structure is not designed to handle it.
The Role of Soil Composition
Not all soil reacts the same way when a pool is drained. The type of earth surrounding the structure plays a critical role in the severity of filled in pool problems. Clay soils, for example, have poor drainage and retain a significant amount of moisture, leading to high swelling pressure. Sandy soils drain better but can shift and settle when saturated, creating uneven forces on the pool shell. Therefore, a professional assessment of the local geology is essential before committing to a full draining.
Structural Integrity and Engineering Solutions
Modern pools are engineered to handle the lateral pressure of water pushing outwards. What they are often not engineered for is the opposite force pushing inwards. This is the core of the filled in pool problem that contractors must address. To mitigate the risk, engineers use various countermeasures. Installing a ground water relief system is one of the most effective solutions. This involves creating a perimeter around the pool to collect and redirect groundwater away from the structure, equalizing the pressure.
Temporary vs. Permanent Relief Systems
During the draining process, temporary relief is often sufficient. This might involve placing gravel or porous PVC pipes around the pool footer to facilitate water flow away from the walls. For a permanent solution, especially in high-water-table areas, a professional might install a drilled well or a sump system with a pump. These systems actively lower the water table around the pool, ensuring that the empty structure remains stable and upright until it is refilled or rebuilt.
The Draining Process Itself
How you drain the pool can influence the severity of filled in pool problems. A rapid, uncontrolled drain can exacerbate the stress on the walls. It is generally recommended to lower the water level slowly, perhaps a few inches per day, allowing the surrounding soil to adjust to the changing pressure gradients. Furthermore, never drain an inground pool when the groundwater is high; if the pool water level and the groundwater level are close, the risk of floating the empty shell or causing wall failure is too high.
Alternative Maintenance Strategies
Because of the inherent risks, many industry professionals advocate for avoiding the complete draining of a pool whenever possible. Instead of viewing a filled in pool problem as a puzzle to solve after the fact, it is better to treat the water as a necessary component of the structural system. Regular chemical balancing and keeping the pool operational throughout the year is often the safest and most cost-effective strategy. If a pool must be empty for an extended period, consulting with a structural engineer to install temporary bracing is highly recommended.
Recognizing the Warning Signs
Property owners should be vigilant for the signs of distress that indicate filled in pool problems are occurring. Once the water is gone, inspecting the structure should be a priority. Look for new cracks in the plaster or gunite, especially those that are vertical or stair-stepped. Walls that appear to be bowing inward or floors that feel uneven or sloped are critical red flags. If any of these signs are present, the area should be evaluated by a structural professional immediately to prevent catastrophic failure.