Drip Edge on Top or Under Felt: Correct Installation Guide
When installing a new roof or replacing old materials, one of the most critical yet overlooked decisions revolves around the placement of the drip edge on top or under felt. This specific choice impacts the roof's ability to manage water, resist wind-driven rain, and maintain structural integrity over time. Getting this detail wrong can create pathways for moisture intrusion, while doing it correctly provides a vital first line of defense against the elements.
Understanding the Anatomy of a Roof Edge
The roof edge is the boundary where the roofing material terminates, making it exceptionally vulnerable to water infiltration. The drip edge is a metal flashing, typically made of aluminum or galvanized steel, designed to seal this edge and direct water away from the fascia and into the gutters. Felt, or underlayment, is a water-shedding barrier installed directly on the roof deck, providing a secondary layer of protection beneath the shingles. Understanding how these two components interact is essential for a watertight installation.
The Case for Drip Edge Under the Felt
Placing the drip edge under the underlayment is the method recommended by most major shingle manufacturers, including GAF, Owens Corning, and Malarkey. This "drip edge first" approach ensures that the underlayment overlaps the metal flashing, creating a layered barrier where water flows over both materials. If water gets between the shingles and the felt, it will ultimately hit the drip edge and be directed into the gutter, rather than seeping behind the fascia.
Advantages of the Under-Felt Method
- Superior Water Diversion: The overlapping structure forces water downward, preventing it from working its way underneath the shingles.
- Shingle Protection: The drip edge acts as a clamp, holding the bottom edge of the underlayment in place during high winds.
- Ice Dam Resistance: It helps prevent meltwater from infiltrating the roof deck at the eaves, a common issue in cold climates.
The Argument for Drip Edge Over the Felt
While less common, some installers prefer to place the drip edge on top of the underlayment. This method is often chosen for its aesthetic appeal, as it creates a tight, crisp edge that hides any irregularities in the roof deck or the cut end of the felt. It is also sometimes used in repairs where the existing underlayment is left in place.
Potential Drawbacks to Consider
Installing the drip edge over the felt introduces a risk known as "capillary action." If the felt is saturated with water, moisture can wick upward between the felt and the drip edge. Because the drip edge is sealed on top, this trapped water can potentially flow backward toward the sheathing. This method generally requires meticulous sealing at the overlapping edges to be considered effective.
Industry Standards and Building Codes
To ensure longevity and warranty validity, it is crucial to align your installation with manufacturer specifications. Most asphalt shingle warranties explicitly state that the drip edge must be installed before the underlayment. Modern building codes in colder regions often mandate this specific installation sequence to qualify for ice dam warranties. Deviating from these standards can void protections and lead to premature roof failure.
The Composite Solution: Ice and Water Shield
In regions prone to severe weather, contractors often utilize a hybrid approach. They will install the metal drip edge first, followed by a synthetic underlayment or self-adhesive ice and water shield membrane. The self-adhesive properties of these modern membranes create a seamless bond that resists wind uplift and flowing water far better than traditional felt. This composite system represents the current best practice for drip edge on top or under felt scenarios where maximum protection is required.
Final Recommendations for Your Project
For the vast majority of residential roofing projects, the consensus is clear: the drip edge belongs under the felt. This configuration provides the most robust defense against the elements and adheres to the guidelines set forth by shingle manufacturers. Whether you are overseeing a new construction or a replacement, prioritizing this detail will save you from potential headaches related to leaks and moisture damage down the line.