Button Cell Battery Sizes Chart: Complete Guide to CR, SR, and LR Types
Button cell batteries power a surprising array of devices in our daily lives, from the key fob for your car to the sleek fitness tracker on your wrist. These compact power sources are defined by their small, circular shape and are identified by a specific alphanumeric code that denotes their dimensions and chemistry. Understanding the nuances of button cell battery sizes is essential for selecting the correct cell for your device, ensuring optimal performance and safety.
Decoding the Naming Convention
The designation for button cell batteries is not random; it is a precise code established by the International Electrotechnical Commission (IEC). The first letter identifies the shape, which is always a "button" or "coin" form factor. The numbers that follow indicate the specific dimensions of the cell. The first two digits represent the diameter in millimeters, rounded to the nearest whole number. The last two digits signify the height in tenths of a millimeters. For example, a CR2032 battery is 20mm in diameter and 3.2mm in height, making it one of the most common cells found in household electronics.
Common Lithium Coin Cells: CR Series
Lithium manganese dioxide (MnO2) coin cells are favored for their stable voltage, low self-discharge rate, and excellent performance in low-temperature environments. These characteristics make them ideal for memory backup in computers, remote controls, and key fobs. The CR series is the most prevalent category you will encounter. Below is a comparison of the most popular sizes within this series:
| IEC Designation | Diameter (mm) | Height (mm) | Typical Capacity (mAh) |
|---|---|---|---|
| CR2016 | 20.0 | 1.6 | 60-80 |
| CR2025 | 20.0 | 2.5 | 150-190 |
| CR2032 | 20.0 | 3.2 | 220-240 |
| CR2430 | 24.0 | 3.0 | 280-320 |
| CR2450 | 24.0 | 5.0 | 550-620 |
| CR3032 | 30.0 | 3.2 | 375-400 |
Thinner Form Factors for Slim Devices
Not all devices have the internal space to accommodate standard coin cells. For ultra-slim applications like slimmer key fobs, greeting cards, or ultra-thin remote controls, the LR/LD series provides a solution. These cells utilize alkaline chemistry instead of lithium. While they generally offer a lower voltage (1.5V) and a shorter lifespan compared to their lithium counterparts, their flat, thin profile is necessary for modern miniaturization. The LD series specifically refers to thinner variants of the LR size.
Rechargeable Options: The Alternative to Disposable
For devices used frequently, disposable batteries can become costly and environmentally taxing. Rechargeable button cell batteries offer a sustainable and economical alternative. The most common type is the Nickel Metal Hydride (NiMH) cell, which typically has a nominal voltage of 1.2V. It is crucial to note that the voltage of a rechargeable cell is lower than the 1.5V or 3V of primary cells. Before attempting to recharge a button cell, always verify that your device is compatible with this lower voltage and specifically supports NiMH chemistry, as attempting to recharge a non-rechargeable lithium cell is extremely dangerous.
Selecting the Right Battery for Your Device
Choosing the correct button cell battery requires more than just matching the diameter; the height (thickness) is equally critical. A cell that is too thin may not make proper contact with the spring terminals, resulting in intermittent power. Conversely, a cell that is too thick can damage the device's casing or put undue pressure on the terminals. When in doubt, consult the user manual of your device. If the manual is unavailable, the old battery itself is the best reference, as the manufacturer has often printed the model number directly onto the cell housing.
Understanding the specific requirements of your device ensures longevity and reliability. High-drain devices like digital thermometers or loud alarms may perform better with high-capacity lithium cells, whereas low-drain devices like LED candles or wall clocks can operate efficiently on standard alkaline or even carbon zinc cells. By matching the physical dimensions and chemical properties to the intended application, you ensure that your electronic devices function as designed, safely and efficiently.