2020 Honda CR-V Roof Rails Installation: Easy Step-by-Step Guide
Installing 2020 Honda CR-V roof rails is one of the most practical upgrades you can make to enhance the versatility of your crossover. Whether you are planning a weekend camping trip, hauling lumber for a DIY project, or simply relocating your luggage to the back seat, these rails provide the essential infrastructure for securing cargo. This guide walks you through the process step-by-step, ensuring a secure and professional-looking installation without the need for professional help.
Understanding the 2020 CR-V’s Rail System
Before diving into the installation, it is important to understand the specific design of the 2020 model year. Honda engineers integrated pre-drilled mounting points into the roof structure, which are hidden beneath the plastic molding. The roof rails clip into these channels, distributing the weight of the load evenly across the chassis. This design preserves the integrity of the vehicle’s weatherproofing while providing a robust platform for aftermarket accessories like crossbars and cargo baskets.
Tools and Preparation
Gathering the right tools is the key to a stress-free installation. You will need a standard screwdriver set, a Torx driver (specifically T20 and T30 bits), a measuring tape, and a soft cloth to protect the vehicle’s paint. It is also wise to have painter’s tape on hand to mark drilling locations temporarily. Before starting, ensure the vehicle is parked on a level surface and the roof is clean and dry to prevent slippage during the installation process.
Step-by-Step Installation Process
The actual installation involves aligning the rail grooves with the longitudinal channels running along the roof. Start by removing the plastic caps that cover the mounting holes. Next, carefully slide the rail section into the channel, applying even pressure to ensure the clips engage securely. You will hear a distinct "click" sound when the rail is properly seated. Once aligned, use the Torx screws to tighten the hardware, but avoid overtightening, as this can warp the roof channel.
Measuring and Alignment
Accuracy is critical when positioning the rails. Use the measuring tape to determine the exact centerline of your roof and mark the front and rear mounting points accordingly. Many installers recommend placing the rails approximately 12 to 18 inches back from the front edge of the roof to allow for hatch opening clearance. Taking the time to measure twice and drill once will save you from potential adjustments later and ensure the load remains balanced during transit.
Securing the Load
With the rails installed, the next step is utilizing them effectively. Thread the crossbars that came with the rails through the grooved channels. These bars act as the anchor point for your cargo management system. When tightening the crossbar locks, ensure they are snug enough to prevent lateral movement. For added security, consider using rubberized pads between the bar and the rail to minimize noise and protect the finish from scratches during your drives.
Maintenance and Longevity
To ensure the roof rails remain functional for the life of your vehicle, periodic maintenance is required. Inspect the mounting brackets for any signs of rust or corrosion, particularly during the winter months when road salt is prevalent. Lubricating the sliding components of the rail system with a silicone-based lubricant can make attaching and detaching accessories smoother. Proper care not only extends the life of the rails but also preserves the resale value of your CR-V by keeping the factory roof structure pristine.